CA SERIES PROFESSIONAL POWER AMPLIFIER
Application: Description:2U standard chassis, high-strength steel frametructure: SMT patch technology ensures product consistency and stability: Choice of stereo, parallel bridge three working modes; Toroidal transformer full of power, with magnetic screen layer, effective isolation interference: Carefully built high-power high-efficiency professional amplifier; With DC overload, overheating, automatic limiting and other a spects of protection; Carefully tested electronic components with advanced and reasonab circuit design.
Specifications:
|
Model |
CA2002 |
CA2003 |
CA2004 |
CA2006 |
CA2008 |
CA2010 |
CA2013 |
|
Rated Power（1KHz, 0.1%THD+N） Stereo Power 8Ω |
200W |
300W |
400W |
600W |
800W |
1000W |
1300W |
|
Rated Power（1KHz, 0.1%THD+N） Stereo Power 4Ω |
300W |
450W |
600W |
900W |
1200W |
1500W |
2000W |
|
Brige Power 8Ω |
600W |
900W |
1200W |
1800W |
2400W |
3000W |
4000W |
|
Signal To Noise |
>112dB |
||||||
| Slew Rate |
>100V/us |
||||||
|
Damping Factor |
>1500:1 |
||||||
|
Frequency Response |
20Hz-20KHz,±0.5dB |
||||||
| THD+N |
<0.025% |
||||||
|
IMD |
<0.05% |
||||||
|
Input Sensitivity(×40/32dB) |
0.775V/1.4V（32dB） |
||||||
|
Input Impedance |
20k ohms BALANCE / 10k ohms UNBALANCE |
||||||
|
Input CMRR |
>80dB |
||||||
|
Crosstalk |
>80dB |
||||||
|
Voltage Gain 0.775V/0dBm |
×55 |
×65 |
×75 |
×92 |
×106 |
×120 |
×135 |
|
Input Link |
One balanced XLR interface per channel |
||||||
|
Output Link |
One 4-POLE Speakon interface for each channel and a pair of plum blossom anti-touch binding posts |
||||||
|
Protection |
Full-featured protection circuit, including temperature (overheating), short circuit, DC, voltage limit, overload, over current, distortion limit, under voltage/over voltage, on/off Noise, load mismatch (low resistance), start-up soft start, start-up anti-surge, radio interference, secondary waves, high-frequency output automatic detection (super high Frequency) protection and other protection. |
||||||
|
LED Indicator |
Protection (PEA), signal (SIG), overheating (TEM), bridge (BRI), stereo (STE), mono (PAR) |
||||||
|
Cooling System |
By the front-to-back air convection mechanism, the internal air is forced to dissipate heat, and the automatic continuously variable speed double fan forced cooling |
||||||
|
Output Circuit Type |
Class H |
||||||
|
Max Power Consumption |
500VA/3.0A |
750VA/3.3A |
1000VA/4.3A |
1500VA/6.5A |
2000VA/8.7A |
2500VA/10.9A |
3500VA/15.2A |
|
Power Supply |
AC220-230V，50Hz/60Hz |
||||||
|
Weight |
12.5kg |
12.8kg |
13.5kg |
16.3k |
16.8kg |
17.5kg |
25kg |
|
Dimensions (W x D x H) |
482mmx400mmx88mm |
||||||
